Main navigation
Models
RhinoEU®
RhinoEU® Bare

RhinoEU® Bare finish panels are manufactured from a high density of calcium sulphate (approx. 1,650 kg/m³) non-toxic and non-combustible material. The top and base surfaces of the core are laminated with galvanized steel sheet. The panel edges are then laminated with an ABS/PVC edge band which provides protection to the calcium sulphate core.

RhinoEU® Covered

RhinoEU® HPL/PVC finish panels are manufactured from a high density of calcium sulphate (approx. 1,650 kg/m³) non-toxic and non-combustible material. The top surface of the core is laminated with Anti-static High Pressure Laminate (HPL) or Conductive Vinyl (PVC) tiles and the base surface is laminated with galvanized steel sheet. The panel edges are then laminated with an ABS/PVC edge band which provides protection to the calcium sulphate core.

RhinoEU® Encapsulated

RhinoEU® Full-encapsulated panels are manufactured from a high density of calcium sulphate (approx. 1,650 kg/m³) non-toxic and non-combustible material. The design incorporates a unique wrap around construction which makes panel removal and replacement easily. This design provides more strength on edges.

 

 

RhinoEU® Airflow

RhinoEU® Airflow panels are manufactured from structural steel technology makes the size and thickness same as EU panels but light weight. The top surface of the panel is laminated with anti-static HPL or conductive vinyl tiles with numbers of different airflow rates, this resistance welded all-steel panels are the premier choice for computer rooms and data centers. 

RhinoRoc®
RhinoROC® Bare

RhinoROC® bare finish panels are manufactured from cold rolled steel resistance welded, light weight cement-filled steel panels are specifically designed to accommodate dynamic loads and to withstand some of the highest ultimate loads in the industry. The design incorporates a classic 64 domes bottom shell with cross-beams and 4-ribbed beams strengthen center and perimeter of the panel, total 140 resistance welds dramatically improved edge load capacities, and overall panel durability.

RhinoROC® Covered C-trim

RhinoROC® HPL or PVC finish panel has the same welded structural steel technology found in the Roc bare finish panel making the two interchangeable, high-strength but with various finishes are the premier choice for computer room and data centers.

RhinoROC® Covered F-trim

RhinoROC® HPL or PVC finish panel with F trim has the same welded structural steel technology found in the Roc bare finish panel making the two interchangeable. The tiny straight trim with excellent squareness is the premier choice for an office building when client has a special requirement for HPL or Vinyl floor covering with various colors option.

RhinoROC® Airflow

RhinoROC® Airflow panels are manufactured from structural steel technology makes the size and thickness same as Roc Covered panels but light weight. The top surface of the panel is laminated with anti-static HPL or conductive vinyl tiles with numbers of different airflow rates, this resistance welded all-steel panels are the premier choice for computer rooms and data centers.

Alutec®
RhinoAlutec® Solid

Alutec aluminum solid panels are specifically designed for the areas inside clean rooms where extremely heavy equipments are installed. The unique lattice structure of Rhino’s solid panel allows for excellent weight dispersion. Non-ferrous, precision-machined and lightweight, these panels offer ease-of-handling and a tight, precise fit. 

RhinoAlutec® Perforated

Alutec aluminum perforated panel has the same lattice structure design of solid panel, the top of the panel is laminated with anti-static HPL or conductive vinyl, this perforated panel with 1,080 chamfered holes and nominal air open ratios from 17% - 25% are designed to meet specific air flow requirements for both data centers and clean rooms.

RhinoAlutec® Grating

Alutec aluminum grating panel (50% airflow) is an ideal solution for cooling, this panel is specifically designed with no underside obstructions to provide optimum laminar air flow. It has been widely used in data centers and server rooms.

RhinoAlutec® Circular

Alutec aluminum circular panel (55% airflow) is an ideal solution for cooling, this panel is specifically designed with no underside obstructions to provide optimum laminar air flow. It has been widely used in data centers and server rooms. 

Fibrecore®
RhinoFibrecore® Bare

Fibrecore bare finish panels are manufactured from chipboard core (approx. 680 kg/m³) non-toxic and light weight material. The top and bottom surface of the core are laminated with galvanized steel sheet. The panel edges are then laminated with an ABS/PVC edge band which provides protection to the chipboard core.

RhinoFibrecore® Covered

Fibrecore HPL/PVC finish panels are manufactured from a chipboard core (approx. 680 kg/m³) non-toxic and light weight material. The top surface of the core is laminated with anti-static high pressure laminate (HPL) or conductive vinyl (PVC) tiles and the base surface is laminated with galvanized steel sheet. The panel edges are then laminated with an ABS/PVC edge band which provides protection to the chipboard core. 

Cross®
RhinoCROSS® Triangle

Cross low-profile floor tiles are manufactured from high quality galvanized steel formed in a triangle structure, is the primary tile used for low ceiling areas available from 40mm to 60mm height perfect for existing buildings that were not designed for traditional access floors, the galvanized steel modular tiles snap-in together very easily, and strictly for voice and data applications. This user-friendly series is readily installed and removed.

RhinoCROSS® Channel

Cross Channel® system low-profile access floor is a cementitious filled steel multi-channel cable management system. It is height adjustable from 35mm to 100mm. The panel is made of high quality steel plates which are press-formed and filled with bubble cement, then sprayed with powder coat epoxy finish. Zinc-plated height-adjustable pedestals are self locking and range in height from 35mm to 100mm. Grooved channels interlock and keep components in place. Symmetrical concave design distributes loads evenly.

RhinoCROSS® Unifix

Cross Unifix® bare finish panel was manufactured from cold rolled steel resistance weld, light weight cement infill panels are specifically designed to accommodate 500mm x 500mm carpet tiles for general office’s application. Pre-formed outlet holes saved a lot of time on cutting panels for cable outlet at site. The Unifix® design maximized system’s stability and widely used in Japan market where earthquakes are frequent.

Finishes
RhinoDalton® Nylon Carpet

Dalton® is a leading manufacturer of high quality, durable business carpets and carpet tiles for commercial applications such as offices, banks, retail units, public buildings, schools, universities and health care centers. Rhino’s Dalton® modular carpet tiles are designed to stay on the raised access floors with no up-curl, tapping or ripping. Our square tiles are easier to handle, install and maintain.

RhinoUC® PP Carpet

UC® modular carpet tiles are designed to stay on the floor with no upcurl, tapping or rippling. Our square tiles are easier to handle, install and maintain. They install with just 3-4% waste and as little as 2% compared to an average 15% for traditional roll carpet. It has been widely used for commercial applications such as offices, banks, retail units, public buildings, schools and health care centers. Rhino is committed to delivering superior carpet tiles in terms of quality, durability and designs through our continuous innovation.

RhinoMeiah® HPL

Meiah® high-pressure decorative plastic laminate is produced in accordance with the European standard EN 438 Class W2. Rhino finds it’s an ideal application in floors for which high surface wear is necessary, and finds it’s the best use in the construction of access floors which can be installed on all types of floor, whether old or new. The surface of Rhino Meiah® HPL is non-toxic, chemically inert and non-allergenic.

RhinoBluetec® PVC

Bluetec® homogeneous ESD vinyl (PVC) guarantees permanent stability on electro-conductive resistance (2.5x104 ~ 1.0x106 Ω) or static dissipative resistance (1.0x104 ~ 1.0x109 Ω), it has been widely used in electronic industry, semi-conductor industry, telecommunications industry, medical industry and healthcare environment. Rhino access floors with Bluetec® ESD vinyl finish is the best choice for computer room, clean room, laboratory, telephone/mobile phone switching center, facility control center, and places where request static control, dust free, and friendly environment.

Accessories
Floor Box

Rhino stainless steel floor box is a cable management system designed specifically for the distribution of power, voice and data service to meet the requirements of raised access flooring environments. The system is economical, relocatable, easily installed and highly flexible thus providing good solution to meet every requirement demand by building owners, architects and consultants involving in providing a highly efficient and easily managed system for both new buildings and buildings under refurbishing.

AirSeal Grommet

AirSeal® grommet is an airflow management to prevent cold and hot air mixing in a data center, and increase a data center’s energy efficiency while increasing its cooling capacity. The Rhino AirSeal® grommet designed to seal access floor holes required for cable routing through the data center raised access floors, these products significantly minimize cool air loss, while improving the static pressure to effectively cool data center equipment, which helps prevent expensive electrical equipment from overheating.

Panel Lifter

Panel Lifter provides safety, versatility, and ease to a multitude of materials handling applications. Whether you need to lift, move, grab, secure or hold non-porous materials, our hand-operated vacuum lifters will make your job easier.

Rhino - RhinoROC® Covered F-trim

RhinoROC® Covered F-trim

Technical Specs

RhinoROC® Covered F-trim - Technical Specs
  ROC100F ROC200F
Panel Size 600mm x 600mm 600mm x 600mm
Panel Thickness (nominal) 35.00 mm 35.00 mm
Panel Weight 14.00 kgs 15.00 kgs
System Weight (typical) 44.97 kgs 47.75 kgs
Point load 25x25mm sq 3.00 kN 4.50 kN
UDL/SQM 8.00 kN 12.00 kN
Ultimate load 9.00 kN 13.50 kN

Features

RhinoROC® Covered F-trim - Technical Specs

1. Interchangeable with other Roc panels
2. Quiet, with a solid feel underfoot
3. Powder-coated, protective epoxy finish
4. Wide range of covering options